• Excellent high-temperature anti-seize performance: over 300°C gives the grease extremely high heat resistance. In environments above 330°C , the base oil evaporates more , and the high-temperature solid lubricant additives such as nickel powder play their role, ensuring long-term operation of the equipment . It can also effectively prevent seizing at extremely high temperatures and can withstand temperatures up to 1,400 °C .

  High viscosity base oil: The excellent oil film composition of the base oil endows the grease with superior anti-friction and anti-wear properties . It also boasts excellent high-temperature performance and adhesion, a low coefficient of friction, and strong load-bearing capacity.

• Excellent sealing stability performance: Excellent thread sealing performance, non-dispersion preload, no stress cracking or weld brittleness, and can be disassembled without damage even after long-term operation at high temperature.

  Excellent corrosion protection performance: Excellent rust and corrosion resistance, effectively reducing the maintenance cost of lubricated parts by 60%; copper-colored, stain-free, resistant to acid and alkali corrosion and does not corrode metals, and resistant to hot and cold water.

  Enhanced extreme pressure and anti-wear properties: Excellent load-bearing capacity and lubrication performance, low friction coefficient, reducing wear of lubricated parts by 80% under high temperature and high load conditions. It is wear-resistant, prevents shaft seizing, and prevents hysteresis even under high surface pressure.

Application And Packaging Specifications

High-Temp High-Load Sliding & Oscillating Parts

Suitable for lubrication of high temperature/high load, low speed sliding/oscillating parts, such as high temperature bushings, pins, bolts, flanges, shafts and joints, especially stainless steel bolted connections under high heat load to prevent sticking or adhesion

High-Temperature Thread & Flange Anti-Seize

Suitable for lubrication of threads, flanges, and seals in turbines, engines, valves, and other high-temperature applications , preventing high-temperature seizing at metal connections

Automotive Brake Anti-Seize & Noise Elimination

Applicable to the back of automotive brake pads, preventing the brake pads on the guide pin of the brake caliper slide head from sticking and seizing, avoiding corrosion between the brake pads and the caliper groove, eliminating brake squealing noise, preventing brake pads from seizing due to heat and preventing water and salt corrosion, enabling the entire slide head device to operate precisely, ensuring complete engagement of the brake pads after braking and rapid release of the brake disc, extending the service life of the entire automotive braking system, eliminating noise and crushing sounds during braking, and is especially suitable for ABS braking systems.

High-Pressure Equipment Fasteners & Bearings

Fastening bolts, chains, and low-speed rotating bearings for high-temperature and high-pressure equipment such as locomotives, cement plants, ships, and automobiles

Power & Nuclear Plant Steam Turbines

It is widely used in steam turbines and steam wheels of power plants and nuclear power plants

Multiple Packaging Specifications

This product is available in 500g sizes. Packaging options include 1kg tin cans, 18kg plastic drums, and 200kg tin drums.

Operating Precautions

Before use, remove as much contaminant and residue as possible. Ensure that the lubricated parts are clean and do not mix with other greases. When using, pay attention to the appropriate amount of grease to inject .

How To Use

■ Surface Preparation: Ensure all surfaces are clean, dry, and free of oil, dust, moisture, and old lubricants before application.
■ Apply Evenly: Use a brush, spatula, or gloved hand to apply a uniform layer to threads, bolts, nuts, or contact surfaces.
■ Use Proper Amount: Apply a thin, even film. Avoid excessive application to prevent contamination or assembly issues.
■ Assembly: Assemble components immediately after application and tighten according to specified torque.

Contact Us

Contacts: Sales Department

E-mail: info@ybslube.com

Tel: +86-13192083114

WhatsApp: +86-18934578611

ADD: Building 15, No. 142, Jinghai West Road, Chang'an Town, Dongguan City, Guangdong Province, China

Social Media

Industrial Lubrication Manufacturer.

Quick Link

Lubricants