High Load Fluorinated Grease YBS-1767 Manufacturer YBS
YBS-1767 fluorinated grease is a high-viscosity, long-life grease refined from a highly chemically stable synthetic oil as the base oil, polytetrafluoroethylene (PTFE) powder as the thickener , and special anti-corrosion additives.
Fluorinated grease is specifically developed for machinery with high maintenance costs or requiring continuous operation. It is a highly efficient, long-life, safe, reliable, and high-performance grease suitable for use under abnormal cyclic conditions. It is mainly suitable for lubricating various bearings, gears, chains, and transmission machinery components in harsh environments with high temperatures and high loads. It is also suitable for lubricating and dynamically sealing various valves, cocks, and plastic-to-metal and metal-to-rubber parts under high and low temperatures.
High-temperature load capacity: Superior lubrication performance under extreme temperatures; critical load at 150 ℃ can reach 120KG.
Low temperature performance: Excellent low temperature characteristics and viscosity-temperature properties.
Lubrication performance: It has low surface tension and can effectively lubricate the surfaces of friction pairs.
Electrical properties: Good dielectric properties, good insulation properties, dielectric constant of 2.1-2.3, and breakdown voltage up to 30 kV.
Compatibility: Good compatibility with plastics, rubber, and other materials.
Evaporation performance: It has low evaporation loss performance.
Water resistance: After being soaked in water at 25℃-50℃ for 3 hours, there was no change. After being soaked in water at 25℃ for 5 months, there was no change in weight or state, demonstrating excellent water resistance.
Mechanical stability: It does not decompose under mechanical pressure, maintains a stable state with lubricating oil, and has good rolling stability.
Economic benefits: Long service life , reduced downtime, lower maintenance costs, and overall cost savings.
Application And Packaging Specifications
Textile Industry Applications
Bevel gearboxes for film stretching machines and tenter frame machines; bearings for steam engines and dryers; lifting shaft bearings for dyeing and printing machines; chains and gearboxes for tenter frame machines; conveyor belt bearings for heat setting machines.
Mold Industry
Ejector pins, slides, angled ejectors, sliders, guide pillars.
Paint Spraying Line
Suspension chains, paint lines, spraying line drying boxes and bearings in the paint shop of an automobile factory.
Baking Equipment
Oven conveyor, roller chain, flat chain, dry silo, bread oven chain.
Vacuum High Pressure
Lubrication and sealing of bearings, pumps, valves, and seals in reciprocating booster pumps, mechanical booster pumps, and oil-sealed vacuum pumps.
Precision Instruments
Suitable for the lifetime lubrication of components in precision machines, optical instruments, office equipment, and cleanroom equipment.
Automotive Interior Parts
Car lights, switches, buttons, automatic transmission gear shifters, sunroofs, air vents, and other interior components.
Semiconductors
Used in semiconductor equipment and chemical processing machinery.
Operating Precautions
■ Store in a cool, dry place, away from high heat and open flames; keep container tightly sealed.
■ Clean dust and oil residues from the workpiece surface thoroughly before application.
■ Apply a thin layer; do not apply excessive amounts.
■ Do not mix with other standard greases.
■ Wear gloves during handling to avoid direct skin contact.
■ Keep away from food products; do not ingest.
■ Tightly close the lid immediately after use to prevent dust contamination and spoilage.Store in a cool, dry, and well-ventilated area away from direct sunlight.
How To Use
■ Preparing the parts for application: New parts are typically treated with organic rust-preventive oil or lubricated with grease during storage to prevent damage . Before use , new bearings should be inspected for damage and imperfections.
■ Cleaning before use : Corrosion-resistant coatings and rust - proofing for metal surfaces also prevent grease from adhering and causing it to be ejected from the bearing during operation. These coatings can also oxidize and harden , producing debris that can contaminate the grease. A final cleaning of the components must be thorough ; failure to do so may result in a shortened bearing life.
■ Fluorine grease is suitable for use in long-term high-temperature environments, but it also needs to be lubricated regularly, about once every 1-3 months. The amount added can be adjusted according to the length of the lubrication cycle.
Contact Us
Contacts: Sales Department
E-mail: info@ybslube.com
Tel: +86-13192083114
WhatsApp: +86-18934578611
ADD: Building 15, No. 142, Jinghai West Road, Chang'an Town, Dongguan City, Guangdong Province, China
Social Media
Industrial Lubrication Manufacturer.
Quick Link
Lubricants